제품 소개정치활동 위원회 배터리

의료 기기를 위한 정치활동 위원회 3.5Ah 18650 12v 리튬 이온 팩

의료 기기를 위한 정치활동 위원회 3.5Ah 18650 12v 리튬 이온 팩

의료 기기를 위한 정치활동 위원회 3.5Ah 18650 12v 리튬 이온 팩
PAC 3.5Ah 18650 12v Lithium Ion Pack For Medical Device
의료 기기를 위한 정치활동 위원회 3.5Ah 18650 12v 리튬 이온 팩
제품 상세 정보:
원래 장소: 광동, 중국 (본토)
브랜드 이름: PAC/OEM
인증: UL1642, MSDS, ROHS, UN38.3
모델 번호: 12v 리튬 이온 건전지 팩
결제 및 배송 조건:
최소 주문 수량: 200PCS
가격: Negotiable
포장 세부 사항: 표준 수출 판지
배달 시간: 표본을 위한 15-20 일, 대량 생산을 위한 25-35 일
지불 조건: 전신환
공급 능력: 5,000pcs/day
접촉
상세 제품 설명
타입: 고용량 리튬 이온 건전지 전지 성능: 3.5Ah
공칭 전압: 11.1V 브랜드: PAC
애플리케이션: 의료 기기, POS 기계 팩 크기: 73*55.5*19mm
주기: 500배 중량: 150g에 관하여
하이 라이트:

18650 12v 리튬 이온 팩

,

3.5Ah 12v 리튬 이온 팩

,

정치활동 위원회 리튬이온 재충전형 배터리

PAC Battery 18650 12v lithium ion pack 3.5Ah high capacity for medical device
 

1. This specification describes the basic performance, technical requirement, testing method, warning and caution of the Li- ion Cylindrical rechargeable battery .The specification only applies to PAC Technology Co.,Ltd.
Because batteries utilize a chemical reaction, battery performance will deteriorate over time even if stored for a long period of time without being used. In addition, if the various usage conditions such as charge, discharge, ambient temperature, etc. are not maintained within the specified ranges the life expectancy of the battery may be shortened or the device in which the battery is used may be damaged by electrolyte leakage. If the batteries cannot maintain a charge for long periods of time, even when they are charged correctly, this may indicate it is time to change the battery.


2.0.2C capacity testing of 12v 18650 lithium battery pack
After standard charging, rest battery for 10min, then discharging at 0.2C to voltage 3.0V, recording the discharging time.
3. Cycle life testing of 12v 3.5Ah lithium battery pack
Constant current 0.5C charge to 4.2V, then constant voltage charge to current declines to 0.01C, rest 10min,constant current 0.5C discharge to 3.0V, rest 10min. Repeat above steps till continuously discharging capacity Higher than 80% of the Initial Capacities of the Cells. 
 
4. Battery specification of 12v medical device lithium battery:

NO. Item Specifications
2.1 Typical Capacity 3500mAh @ 0.2C Discharge (0.2C)
2.2 Nominal voltage 11.1V
2.3 Charge Max input voltage 26V±0.05
Max Charge voltage 12.6V±0.05
Standard charge current 700mA
Max Charge current 3500mA
2.4 Discharge Min Discharge voltage 8.1±0.08V (PCB End-of-charge Voltage)
Fast Discharge current 3500mA
Max continuous discharge current 4000mA
2.5 Initial Impedance Max: 250mW
2.6 Weight Approx:150g±2
2.7 Operating temperature Charging: 0℃~45℃
Discharging:-20℃~60℃
2.8 Storage temperature -5℃~35℃
2.9 Storage Humidity ≤75% RH
3.1 Appearance Without scratch, distortion, contamination and leakage
3.11 Standard environmental condition Temperature: 25±2℃
Humidity: 45-75%RH
Atmospheric Pressure: 86-106 KPA


5. Lithium ion Battery operation instruction

5.1 Charging

  • Charging current: Cannot surpass the biggest charging current which in this specification book stipulated.
  • Charging voltage: Does not have to surpass the highest amount which in this specification book stipulated to decide the voltage.
  • Charge temperature: The battery must carry on the charge in the ambient temperature scope which this specification book stipulated.
  • Uses the constant electric current and the constant voltage way charge, the prohibition reverse charges. If the battery positive electrode and the cathode meet instead, can damage the battery.

5.2 Discharging current

  • The discharging current does not have to surpass this specification book stipulation the biggest discharging current, the oversized electric current electric discharge can cause the battery capacity play to reduce and to cause the battery heat.

5.3 Electric discharge temperature

  • The battery discharge must carry on in the ambient temperature scope which this specification book stipulated.

5.4 Over-discharges

  • After the short time excessively discharges charges immediately cannot affect the use, but the long time excessively discharges can cause the battery the performance, battery function losing. The battery long-term has not used, has the possibility to be able to be at because of its automatic flashover characteristic certain excessively discharges the condition, for prevented excessively discharges the occurrence, the battery should maintain the certain electric quantity.

5.5 Storing the Batteries

  • The battery should store in the product specification book stipulation temperature range. If has surpasses above for six months the long time storage, suggested you should carry on additional charge to the battery
6. Delivery of PAC battery pack

• By Air Door to Door Service

• By Sea Door to Door Service

• By Express: EMS, TNT, UPS, FedEx


의료 기기를 위한 정치활동 위원회 3.5Ah 18650 12v 리튬 이온 팩 0


7. Why Choose us?
Reliable quality -- We have 10 years of battery industry experience. Automated production line and precise equipment. In strict accordance with international standards for production inspection, to ensure product quality and safety.
Positive service -- We give response for all inquiries/questions in 24 hours. We have a professional R&D team, we can provide professional customized and one-stop services.
Taking responsibility -- PAC members to proactively take responsibility, we always offer the best solution to our customers.


24 hours customer service, waiting for your inquiry!

연락처 세부 사항
Shenzhen PAC Technology Co., Ltd.

담당자: Ada Wang

전화 번호: 0086 13652343280

회사에 직접 문의 보내기 (0 / 3000)